Bluetooth Socket Scanner S800 - How to configure an iOS (Apple) device to prevent the on-screen keyboard from disappearing

If you are using an iPhone or an iPad and have paired the socket scanner to your device using the Quick guide - Bluetooth Socket Scanner S800, you will need to double-tap the power button on the side of the socket scanner each time you need your on-screen keyboard to appear.

Note: Setting up the socket scanner with the steps below will replace your iPhone keyboard with the Socket Mobile Keyboard.

To make the on-screen keyboard appear without the need to double tap the power button on your iOS device, you'll need to install the socket mobile companion app, this can be found from the link below: https://www.socketmobile.com/support/companion?_gl=1*o3ingy*_ga*MTAyMzA0OTI3NS4xNjQ1NjcyODU5*_ga_98RX67473S*MTY0NTY3Mjg1OC4xLjEuMTY0NTY3MzE1NS4w

Once the companion app has been installed, you'll need to install the Socket Mobile Keyboard app, this can be found from the link below:

https://www.socketmobile.com/support/utility-apps?_gl=1*1dd8cqk*_ga*MTAyMzA0OTI3NS4xNjQ1NjcyODU5*_ga_98RX67473S*MTY0NTY3Mjg1OC4xLjEuMTY0NTY3MzE5MS4w