If you have multiple Outlets linked within your Vendor you can run each of them using individual costs (each outlet has and updates their own cost), global cost (each outlet has and updates the same cost) or a mixture of the two.
For example, you have three Outlets, North, North-West and South. North and North-West are located close to each other, typically receive stock for similar costs and constantly transfer stock between each other so you would like to run these Outlet's at the same costs. South, however is located a fair distance away and gets charged a much higher cost than both North and North-West, therefore you would like South to be maintaining it's own costs. You would set each Outlet as follows:
- North (Global Cost)
- North-West (Global Cost)
- South (Individual Cost)
These settings can change at any time in either direction (e.g. you can add South to Global Cost or you can remove North from Global Cost).
To Configure This Setting
- Select the Menu icon
- In your settings select Setup
- Select General
- Search for Use Global Cost by typing in the search text box
- Select the Outlet
- Toggle Use Global Cost for each outlet you would like to apply this setting to
- Select Save